Tuning Thiophene with Phosphorus: Synthesis and Electronic Properties of Benzobisthiaphospholes

1,4‐Dimercapto‐2,5‐diphosphinobenzene and 3,6‐bis(hexyloxy)‐1,4‐dimercapto‐2,5‐diphosphinobenzene were synthesized and combined with various acid chlorides to obtain a series of benzobisthiaphospholes. Electrochemical and photophysical properties of the substituted benzobisthiaphospholes have been evaluated, and the observed reductions are more facile than the related benzothiaphospholes and 2,6‐diphenylbenzobisthiazole. A benzobisthiaphosphole with C₆H₄‐p‐CN substituents was reduced at E_1/2=?1.08 V (vs. saturated calomel electrode (SCE)). X‐ray diffraction data for several of these phosphorus heterocycles has been obtained, and DFT calculations at the B3LYP level have been performed.     

Orientation‐Controlled Single‐Molecule Junctions

The conductivity of a single aromatic ring, perpendicular to its plane, is determined using a new strategy under ambient conditions and at room temperature by a combination of molecular assembly, scanning tunneling microscopy (STM) imaging, and STM break junction (STM‐BJ) techniques. The construction of such molecular junctions exploits the formation of highly ordered structures of flat‐oriented mesitylene molecules on Au(111) to enable direct tip/π contacts, a result that is not possible by conventional methods. The measured conductance of Au/π/Au junction is about 0.1 G_o , two orders of magnitude higher than the conductance of phenyl rings connected to the electrodes by standard anchoring groups. Our experiments suggest that long‐range ordered structures, which hold the aromatic ring in place and parallel to the surface, are essential to increase probability of the formation of orientation‐controlled molecular junctions.     

Heptagon‐Embedded Pentacene: Synthesis,Structures, and Thin‐Film Transistors of Dibenzo[d,d′]benzo[1,2‐a:4,5‐a′]dicycloheptenes

This study presents a new class of conjugated polycyclic molecules that contain seven‐membered rings, detailing their synthesis, crystal structures and semiconductor properties. These molecules have a nearly flat C₆‐C₇‐C₆‐C₇‐C₆ polycyclic framework with a p‐quinodimethane core. With field‐effect mobilities of up to 0.76 cm² V^?1 s^?1 as measured from solution‐processed thin‐film transistors, these molecules are alternatives to the well‐studied pentacene analogues for applications in organic electronic devices.     

Electrical Network of Single‐Crystalline Metal Oxide Nanoclusters Wired by π‐Molecules

In a mixed‐valence polyoxometalate, electrons are usually delocalized within the cluster anion because of low level of inter‐cluster interaction. Herein, we report the structure and electrical properties of a single crystal in which mixed‐valence polyoxometalates were electrically wired by cationic π‐molecules of tetrathiafulvalene substituted with pyridinium. Electron‐transport characteristics are suggested to represent electron hopping through strong interactions between cluster and cationic π‐molecules.     

A Dinuclear Cu(Ⅱ)-based Coordination Framework with Two-fold Interpenetrated 3D pcu Topology Displaying Catalytic Activity

A new Cu(Ⅱ) coordination polymer, [Cu2(mip)2(bmix)]n(bmix = 1,4-bis(2-methylimidazole-1-ylmethyl)benzene, H2 mip = 5-methylisophthalic acid), has been hydrothermally synthesized and characterized by elemental analyses, IR, TGA and single-crystal X-ray diffraction. The title compound belongs to the triclinic system, space group P1 with a = 9.435(5), b = 12.241(6), c = 13.666(6), β = 94.396(8)o, V = 1565.5(13) 3, Z = 2, C34H30Cu2N4O8, Mr = 749.70, Dc = 1.590 g/cm3, μ = 1.419 mm-1 and F(000) = 768. The title metal-organic coordination polymer exhibits the first two-fold interpenetrated pcu topological structure assembled by two types of dinuclear copper(Ⅱ) clusters and a flexible bis(imidazole)-based ligand. In addition, the fluorescence and catalytic performances of the complex for the degradation of Congo red azo dye in Fenton-like process were presented.     

A Memristive Element Based on an Electrically Controlled Single-Molecule Reaction

The exponential proliferation of data during the information age has required the continuous exploration of novel storage paradigms, materials, and devices with increasing data density. As a step toward the ultimate limits in data density, the development of an electrically controllable single-molecule memristive element is reported. In this device, digital information is encoded through switching between two isomer states by applying a voltage signal to the molecular junction, and the information is read out by monitoring the electrical conductance of each isomer. The two states are cycled using an electrically controllable local-heating mechanism for the forward reaction and catalyzed by a single charge-transfer process for the reverse switching. This single-molecule device can be modulated in situ, is fully reversible, and does not display stochastic switching. The I–V curves of this single-molecule system also exhibit memristive character. These features suggest a new approach for the development of molecular switching systems and storage-class memories.     

Unpaired 3d Electrons on Atomically Dispersed Cobalt Centres in Coordination Polymers Regulate both Oxygen Reduction Reaction (ORR) Activity and Selectivity for Use in Zinc–Air Batteries

Reversible oxygen conversion is important for various green energy technologies. Herein we synthesize a series of bimetallic coordination polymers by varying the Ni/Co ratio and using HITP (HITP=2,3,6,7,10,11‐hexaiminotriphenylene) as the ligand, to interrogate the role of metal centres in modulating the activity of the oxygen reduction reaction (ORR). Co₃HITP₂ and Ni₃HITP₂ are compared. Unpaired 3d electrons in Co₃HITP₂ result in less coplanarity but more radical character. Thus, despite of a reduced crystallinity and conductivity, the best ORR activity, comparable to 20 % Pt/C, is obtained for Co₃HITP₂, showing the 3d orbital configuration of the metal centre promotes ORR. Experimental and DFT studies show a transition of ORR pathway from four‐electron for Co₃HITP₂ to two‐electron for Ni₃HITP₂. Rechargeable zinc–air batteries using Co₃HITP₂ as the air cathode catalyst demonstrate excellent energy efficiency and stability.     

A Photowelding Strategy for Conductivity Restoration in Flexible Circuits

Light‐driven micropumps, which are based on electro‐osmosis with the electric field generated by photocatalytic reactions, are among most attractive research topics in chemical micromotors. Until now, research in this field has mainly been focused on the directional motion or collective behavior of microparticles, which lack practical applications. In this study, we have developed a photowelding strategy for repeated photoinduced conductivity recovery of cracked flexible circuits. We immersed the circuit in a suspension of conductive healing particles and applied photoillumination to the crack; photocatalysis of a predeposited pentacene (PEN) layer triggered electro‐osmotic effects to gather conductive particles at the crack, thus leading to conductivity recovery of the circuit. This photowelding strategy is a novel application of light‐driven micropumps and photocatalysis for conductivity restoration.     

An Arylazopyrazole‐Based N‐Heterocyclic Carbene as a Photoswitch on Gold Surfaces: Light‐Switchable Wettability,Work Function,and Conductance

A novel photoresponsive and fully conjugated N‐heterocyclic carbene (NHC) has been synthesized that combines the excellent photophysical properties of arylazopyrazoles (AAPs) with an NHC that acts as a robust surface anchor (AAP‐BIMe). The formation of self‐assembled monolayers (SAMs) on gold was proven by ToF‐SIMS and XPS, and the organic film displayed a very high stability at elevated temperatures. This stability was also reflected in a high desorption energy, which was determined by temperature‐programmed SIMS measurements. E‐/Z‐AAP‐BIMe@Au photoisomerization resulted in reversible alterations of the surface energy (i.e. wettability), the surface potential (i.e. work function), and the conductance (i.e. resistance). The effects could be explained by the difference in the dipole moment of the isomers. Furthermore, sequential application of a dummy ligand by microcontact printing and subsequent backfilling with AAP‐BIMe allowed its patterning on gold. To the best of our knowledge, this is the first example of a photoswitchable NHC on a gold surface. These properties of AAP‐BIMe@Au illustrate its suitability as a molecular switch for electronic devices.     

Control of Intrachain Morphology in the Formation of Polyfluorene Aggregates on the Single-Molecule Level

Controlling the morphology of π-conjugated polymers for organic optoelectronic devices has long been a goal in the field of materials science. Since the morphology of a polymer chain is closely intertwined with its photophysical properties, it is desirable to be able to change the arrangement of the polymers at will. We investigate the π-conjugated polymer poly(9,9-dioctylfluorene) (PFO), which can exist in three distinctly different structural phases: the α-, β-, and γ-phase. Every phase has a different chain structure and a unique photoluminescence (PL) spectrum. Due to its unique properties and the pronounced spectral structure-property relations, PFO can be used as a model system to study the morphology of π-conjugated polymers. To avoid ensemble averaging, we examine the PL spectrum of single PFO chains embedded in a non-fluorescent matrix. With single-molecule spectroscopy the structural phase of every single chain can be determined, and changes can be monitored very easily. To manipulate the morphology, solvent vapor annealing (SVA) was applied, which leads to a diffusion of the polymer chains in the matrix. The β- and γ-phases appear during the self-assembly of single α-phase PFO chains into mesoscopic aggregates. The extent of β- and γ-phase formation is directed by the solvent-swelling protocol used for aggregation. Aggregation unequivocally promotes formation of the more planar β- and γ-phases. Once these lower-energy more ordered structural phases are formed, SVA cannot return the polymer chain to the less ordered phase by aggregate swelling.